OVERHEAD CRANE TECHNICIAN JOB DESCRIPTION
Find detail information about overhead crane technician job description, duty and skills required for overhead crane technician position.
What does overhead crane do?
An overhead crane is a machine that can be used to move heavy or bulky loads through the overhead space in a facility. This machine is also called an industrial crane, crane, or overhead traveling crane. The main advantage of using an overhead crane is that it can be used more easily than using aisles or on the floor.
What are overhead cranes called?
The overhead bridge crane is a type of crane used in industrial environments for lifting objects. The bridge span is used to move the object from one location to another. The crane is typically used in large projects, such as bridges or highways.
What are the 3 basic components of an overhead crane?
Most industrial bridges are composed of three main components: a bridge, a runway, and a hoist and trolley. The bridge is the primary structure that supports the overhead crane. The runway is where the crane can be suspended from and is typically used to allow for easy movement of the crane. The hoist and trolley are both essential to moving the crane around and are used to raise or lower the bridge, runway, or other structure.
What are the parts of an overhead crane?
It is important to know all the parts of a crane so that you can properly support loads. The most important part of a Crane is the hook, which connects the load to the hoist and to the end effector. The next most important part is the trolley, which helps move the load around. The last part of a Crane is the bridge, which connects different parts of the Crane together.
How many types of overhead cranes are there?
It is easy to see how a gantry crane can be helpful in lifting heavy objects. Its long arm allows it to reach high above the ground, making it perfect for lifting large objects. Another option for using a gantry crane is to use its jib arm to move the object around. This allows you to maneuver the object so that it will not fall off the platform.
How heavy is an overhead crane?
A TRSG crane can handle a wide range of bridge beam capacities, up to 10 tons. This allows for a wider span at the receiving end of the bridge and less potential for fatigue damage.
What is CT and LT in crane?
The trolley/crab moves across the bridge in a long travel motion. The cross travel motion is also seen on the structure which houses the trolley/crab. This motion is seen as being very unstable and dangerous because of this.
How do you maintain an overhead crane?
The lift system on the building is in great condition. All of the parts are in place and working properly. However, there may be some loose, broken, or damaged parts on the system. Make sure that all of the wires are reeved and seated in the drum grooves properly. Be sure to verify that the bottom block is not twisted as it can cause serious problems down the road.
What are mot and EOT systems?
One of the most common types of overhead cranes is an electrically operated traveling crane. This type of crane is used in industrial buildings to lift and transport heavy jobs, machines, and other objects. The M.O.T. is a manually operated overhead crane, while the E.O.T. is an electrically operated overhead crane.
What are crane parts called?
Sheaves are a type of crane component that can increase the weight the hook can lift. The more wire ropes, the more weight is distributed. Sheaves can be used to improve the stability of a crane and help increase its capacity.
What is the meaning of EOT crane?
The electric overhead travelling crane is one of the most common types of overhead crane, which consists of parallel runways with a travelling bridge spanning the gap. This type of crane is very efficient and can be used for a variety of tasks, such as carrying goods or passengers.
What is the arm of a crane called?
A jib arm is typically used in many types of crane to support the load clear of the main support. It is a horizontal beam that is close to the ground. Jib arms are used to help move heavy objects around, and they are also often used in construction and manufacturing.
What are the hazards in crane lifting?
Most cranes use high-G loads to move large objects, such as construction materials or furniture. Electric hazards can occur when the cranes come in contact with live wires, especially if they are not well-protected. Overloading can occur when the crane exceeds its load limit, which can cause the crane to tip over or fall off the platform. Finally, materials may fall from overhead hoists and end up hitting people or equipment below.
What is the difference between gantry crane and overhead crane?
A gantry crane can be a very helpful tool when it comes to erecting ceilings and other structures in a building. These cranes are able to reach high up, so they are perfect for tasks that require a lot of height.
What is mobile and overhead cranes?
A gantry crane is a type of overhead crane that is used for material handling. These cranes are often used in maintenance shops, machine shops and loading areas. Their safety and efficiency make them a popular choice for production applications.
What is a crane designed for?
A crane is a type of machine that is used for lifting and lowering materials. It is mainly used for transportation purposes. The crane is equipped with ropes, chains, or other means of movement to help it move the materials.
What are the major advantages of overhead Travelling crane?
Overturning a warehouse is a great way to reduce product damage. By positioning cranes high in the ceiling, they avoid just about everything on the floor. This, in turn, allows you to install the device just about anywhere you desire. Additionally, you will be able to carry items safely above any obstacles, thereby reducing product damage.
What is the difference between monorail crane and overhead crane?
When looking at monorail and crane, one may think of them as two very different types of transportation options. Monorail is only able to move in two directions and is only used for short trips between stations. Crane, on the other hand, can travel in three directions and can be used for long trips between stations. Although they are both great options for transportation, monorail and crane are quite different in their functionality.
What is number of falls in crane?
The main hoisting line of this crane has six falls, which means that each fall supports 1/6 of the lifted weight, so the crane's wire diameter would be smaller than in the case of a single lifting wire, supporting all the tensions. The six falls also add to the risk of the crane toppling over, which could cause serious injury to both workers and bystanders.
What is number of falls in hoist?
A jib head has a lifting capacity that is increased by adding more falls, and decreased by reducing falls. A configuration with more falls can lift more weight than one without falls.
Which motor is used in cranes?
Four wound DC motor types are commonly used in industrial environments for coil feeding reels in the milling/metalforming, crane hoists, motor-driven cable reels, and elevator hoist motors. Each type has its own unique capabilities and requirements.
What is the problem of crane?
The Wire Rope on an Overhead Crane Can Cause Damage or Failure The Wire Rope on an Overhead Crane can cause damage or failure in a variety of ways. The best way to prevent damage is to inspect your wire rope regularly. If you find any problems, you can take steps to solve them.
Do overhead cranes need to be inspected daily?
There is usually a daily check of the operating mechanisms, parts of the air or hydraulic systems, and hooks and chains during work. These items need to be visually examined on a daily basis to ensure that they are functioning properly. OSHA also recommends testing and examining these items before each shift.
How often do overhead cranes need to be inspected?
Most cranes used in construction are "normal service" cranes which should be inspected monthly. Cranes used in "heavy service" should be inspected weekly to monthly, and a crane in "severe service" should be inspected daily to weekly.
What is long travel in crane?
An EOT Crane can be used for a variety of motions, depending on the need. Heavier loads can be lifted with long travel, while smaller loads can be taken with cross travel. The crane can also be used for moving objects, such as flowers or vegetables.
What is crane girder?
The Crane girder is a type of construction that is often used to support trolley systems. The main horizontal beams of the girder are connected by vertical members. These members typically have a thickness of 1/8-inch and are held up by the end trucks.
What is crane operator?
Crane operators are responsible for lifting and moving materials around a construction site as safely and efficiently as possible. They must be practically minded, with an understanding of how to drive and maintain heavy machinery. Crane drivers need to be aware of the risks involved in each step of the process, from planning the route to carrying out the work.
How much can cranes lift?
A tower crane can lift up to 20 tonnes, while a mobile crane could potentially lift anywhere from 10 to 60 tonnes, depending on their size and mobility. Tower cranes are often used for larger tasks, such as demolishing buildings or erecting bridges. Mobile cranes are used for smaller tasks, such as moving goods between different points on a construction site.
What are the types of EOT?
One type of EOT crane is the single girder EOT crane. This type of EOT crane has a single girder with a trolley and hoist that runs along the axis. This type of EOT crane is very versatile because it can be used for a variety of different tasks. The single girder EOT crane is very efficient because it can get the job done quickly and efficiently.
Which type of brake is used in EOT crane drive?
Caliper brakes are used for emergency duty and are on the low-speed side of the crane to prevent a load from falling in the event of a shaft breaking or transmission failure. When used properly, calipers can help keep your crane running smoothly.
What is span of crane?
Usually, the span of an overhead crane is the measured center-to-center distance between the runway beams. This important measure can be important during an overhead crane consultation as it can help to determine whether or not a particular crane is able to handle a specific project.
What are crane legs called?
Outriggers are retractable hydraulic `legs' that extend, like a spider's legs, away from the truck before they make contact with the ground. They can help keep your vehicle in place while you're driving and can also be used to adjust your height on the road.
What is boom and jib?
The jib boom lift is a type of aerial platform that provides greater range of motion for the platform. This lift is perfect for larger platforms or objects that need more movement. The jib boom lift is also great for larger jobs because it can easily pick up large objects.
What are the three functions of a crane?
A crane is a machine that is used for moving or lifting and lowering heavy materials in construction sites, factories, and other transport industries. It is also used to lift the materials and transport them to some other locations.
What are the 7 types of hazard?
When it comes to workplace hazards, there are many different types to consider. Biological hazards come in the form of bacteria or other living organisms that can cause illness or damage. Chemical hazards can come in the form of chemicals that can cause burns, burns to the skin, or even death. Physical hazards include injuries caused by falls or strikes. Ergonomic hazards are those that affect how people work and move around in the workplace. These may include problems with navigation and space use, as well as time-sensitive tasks that need to be completed quickly. Psychosocial hazards refer to any risks that may affect workers? mental health. These could include stress levels from working in a hazardous environment, feelings of unsafeliness or threats to personal safety, and social isolation from peers and family.
What causes most crane accidents?
In recent years, crane accidents have been on the rise. Many people think that this is because of the new technology that is being used more and more in the workplace. However, the most likely reason for this is because some workers are not properly trained on how to operate cranes safely. This can lead to serious accidents that can damage or kill someone.
What is a lifting plan?
A lifting plan provides a systematic approach towards planning a lift and ensures that the lifting operation is properly managed. For example, a lifting plan would ensure that the crane is safely deployed and operated, and the lifting crew are clear about their roles and responsibilities. The plan would also include a list of materials that will need to be moved or lifted, as well as where they will be placed. This will help ensure that the lift is completed successfully and without any injuries to either the lifts or their operators.
Is overhead crane training required OSHA?
Crane and Hoist Operator Training Requirements Every operation that relies on the use of overhead cranes must make effective crane and hoist operator training a major initiative. A 10-year OSHA study ending in 2007 analyzed the costs of approximately 250 OSHA reported accidents over the 10-year period. The study found that these accidents cost an average of $187,000 per accident. This cost is due to the high number of injuries and fatalities that occur when individuals are working with overhead cranes.
How do you read a crane lift chart?
This craneload chart helps you understand the potential loads that a crane can safely carry. The left column shows the lift radius, while the top row shows the length of the boom. The two numbers in each cell correspond to the crane's load capacity for that specific length and radius. By understanding these data, you can plan your loads so that they are safe and effective.
How many types of lifting are there?
pressure lifters: These lifters use a lot of pressure to lift. The materials they use will determine the type of pressure lifter you choose. Supporting lifters: These lifters are used to balance the weight on the platform and support it. They come in many different shapes and sizes. Gripping lifters: These are used to grip onto a weight and lift it. The material will determine how tight the grip is and how much leverage the person has.
Why is a crane called a crane?
Most crane machines are used for lifting heavy objects. The type of machine that is used for this is known as a crane. This machine has a shape that is similar to the tall, long-necked bird of the same name. The machines that are used for this are often called cranes. These machines can be used for a variety of tasks, including helping to move large objects.
Which motor is used for overhead traveling cranes?
A 50 Hz, 4poles, a single phase induction motor is rotating in the clockwise direction at a speed of 1425 rpm. This motor is preferred for overhead traveling cranes because it is reliable and has low noise levels.
What is difference between crane and hoist?
A crane is a type of heavy lift that can move loads up and down. A crane is also known as a lift, while a trolley and bridge are other types of heavy lifts.